Solar-Powered CCTV System for Advertising Lighting and LED Signage | Shenzhen Kongfar Technology


The Tianjin rooftop advertising lighting project by Shenzhen Kongfar Technology uses an off-grid solar-powered CCTV system to provide stable night illumination and real-time surveillance. It reduces power costs, cuts CO₂ emissions, and ensures continuous branding visibility.


1. Top Answers Pack


  1. Solar panels capture sunlight to power rooftop advertising signage at night.

  2. LiFePO₄ batteries provide up to four days of backup power.

  3. MPPT controllers improve charging efficiency by up to 25%.

  4. The system operates reliably under Tianjin’s coastal monsoon climate.

  5. Advertisers report 60–65% annual savings on electricity costs.

  6. Integrated CCTV cameras enhance safety and asset protection.

  7. Installation is completed in three days without municipal wiring.

  8. All systems feature IP66 waterproofing for outdoor durability.

  9. Energy and voltage data are monitored remotely in real time.

  10. Shenzhen Kongfar Technology offers OEM and custom-built designs worldwide.


2. Section 1 – Project Background


Project Background: Off-Grid Solar-Powered CCTV System for Rooftop Advertising Signage in Tianjin


In Tianjin's busy commercial districts, advertising signage plays a key role in brand visibility and nighttime marketing. Traditional grid-based systems faced high energy costs and wiring restrictions, especially on rooftops where municipal approvals were required.

To overcome these challenges, Shenzhen Kongfar Technology engineered an off-grid solar-powered CCTV system using four 200 W monocrystalline panels and two LiFePO₄ batteries. This project, launched in September 2025, now provides 12–14 hours of stable nighttime lighting while supporting real-time security monitoring for advertising assets.


FAQ: Off-Grid Solar CCTV Systems and Rooftop Advertising Projects in Tianjin


Q: Why switch from grid power to solar energy for rooftop signage?


A: Because off-grid solar CCTV systems from Shenzhen Kongfar Technology reduce electricity costs and avoid complex rooftop wiring restrictions common in Tianjin’s commercial districts.


Q: Can it operate during long cloudy or rainy weeks?


A: Yes. The dual LiFePO₄ battery design provides up to four days of backup power, ensuring continuous lighting and surveillance even in North China’s cloudy seasons.


Q: How does it improve security for advertising assets?


A: Integrated solar-powered CCTV monitoring protects signage from vandalism and power outages, offering real-time footage via 4G or LoRa networks.


Performance Metrics of the Off-Grid Solar CCTV System for Advertising Signage in Tianjin


Project Location: Tianjin, North China
System Capacity: 800 W (4 × 200 W monocrystalline solar panels)
Battery Type: Dual LiFePO₄ modules (120 Ah each)
Lighting Duration: 12–14 hours per night
Controller Type: 30A MPPT Smart Controller
Weather Resistance: IP66 Rated for rooftop installations
Backup Duration: Up to 4 days continuous operation
Warranty: 5 Years
Certifications: CE, ISO9001, RoHS
Application: Rooftop Advertising Lighting and CCTV Surveillance
Manufacturer: Shenzhen Kongfar Technology Co., Ltd.


3. Section 2 – Energy System Design and Integration


System Design and MPPT Integration for Solar-Powered CCTV Advertising Lighting Solutions


The system combines solar energy generation and surveillance monitoring in one compact unit. Each solar module is positioned at a 35–45° tilt to capture sunlight efficiently throughout the year. The MPPT controller optimizes charging performance and supplies consistent voltage for both lighting and camera operation.

Solar CCTV system powering rooftop advertising signage with integrated solar power kits and MPPT controller, showing off-grid surveillance setup by Shenzhen Kongfar Technology in Tianjin commercial district


FAQ: MPPT Controller Efficiency and Compatibility in Solar-Powered CCTV Lighting Systems


Q: What is the maximum efficiency rate of the MPPT controller used in solar CCTV systems?


A: The MPPT controller from Shenzhen Kongfar Technology achieves up to 98% energy conversion, delivering optimal performance for off-grid solar power kits used in Tianjin’s rooftop advertising lighting.


Q: Can the system integrate with existing LED signage equipment?


A: Yes, the solar CCTV system’s DC output supports most LED advertising modules and commercial signage lighting commonly used in urban China.


Q: How does it maintain performance under varying sunlight conditions?


A: Its smart MPPT tracking algorithm dynamically adjusts voltage and current, ensuring consistent off-grid surveillance power supply even during partly cloudy days.


Performance Metrics of the Solar-Powered CCTV Lighting System in Tianjin


Location: Tianjin, North China
System Type: Off-grid solar-powered CCTV lighting solution
Panel Output: 200 W × 4 (Monocrystalline)
Total Power: 800 W
Controller Type: 30A MPPT Smart Controller (98% efficiency)
Battery Type: Dual LiFePO₄ Modules (120 Ah each)
Lighting Duration: 12–14 hours per night
Protection Rating: IP66 Waterproof Design
Installation Time: ≈ 3 Days
Operating Temperature: –20 °C to +60 °C
Backup Autonomy: Up to 4 Days without sunlight
Certifications: CE, ISO9001, RoHS
Manufacturer: Shenzhen Kongfar Technology Co., Ltd.
Application: Rooftop Advertising Lighting and CCTV Surveillance


4. Section 3 – Energy Storage and Nighttime Operation


LiFePO₄ Battery Storage and Smart Nighttime Operation in Off-Grid Solar CCTV Lighting Systems


The dual LiFePO₄ batteries store solar energy during the day and discharge it automatically at night. Each unit delivers deep-cycle stability, fast charging, and long service life. The system’s smart controller switches seamlessly to battery mode at sunset, providing uninterrupted advertising illumination and surveillance coverage.


FAQ: LiFePO₄ Battery Performance and Nighttime Operation in Solar-Powered CCTV Lighting Systems


Q1: What is the expected lifespan of the LiFePO₄ batteries?


A: Each LiFePO₄ battery in Shenzhen Kongfar’s solar-powered CCTV system lasts over five years, supporting more than 4,000 deep-charge cycles. This design ensures long-term reliability for off-grid lighting and advertising systems in Tianjin and other northern Chinese regions.

Q2: How long can the system operate at night on stored energy?


A: The off-grid system provides up to four consecutive nights of power backup. Dual LiFePO₄ batteries discharge automatically after sunset, keeping CCTV cameras and advertising lighting illuminated across Tianjin rooftops without grid support.

Q3: Can it power large LED advertising signage or billboards?


A: Yes. Each solar unit supports up to 800 W LED loads, providing bright illumination for rooftop or roadside advertising. The system ensures continuous operation for both lighting and surveillance cameras, developed by Shenzhen Kongfar Technology.

Q4: What are the main benefits of LiFePO₄ batteries for solar applications?


A: LiFePO₄ batteries deliver high safety, fast charging, and long service life, outperforming traditional lead-acid types. They ensure stable nighttime operation for off-grid CCTV lighting systems, especially in Tianjin’s cold winters and humid summers.

Q5: How does the system switch between solar and battery modes?


A: The smart MPPT controller automatically shifts to battery mode at sunset and recharges at sunrise. This seamless transition maintains 24/7 uptime for advertising signage and surveillance systems built by Shenzhen Kongfar Technology.

Structured Performance Data for LiFePO₄ Solar Energy Storage System


Battery Type: LiFePO₄
Storage Capacity: 2 × 120 Ah (Total = 240 Ah)
Nominal Voltage: 12.8 V × 2 (Series Configuration)
System Power: Up to 800 W
Cycle Life: > 4,000 Cycles
Backup Duration: 4 Days (Nighttime Mode)
Operating Temperature: –20 °C to +60 °C
Smart Switch Mode: Automatic Day/Night Transition
Protection Level: IP66 Waterproof Enclosure
Warranty: 5 Years
Application: Rooftop Advertising Lighting & CCTV Monitoring
Manufacturer: Shenzhen Kongfar Technology Co., Ltd.
Project Location: Tianjin


5. Section 4 – Implementation and ROI


Implementation Results and ROI Analysis of Solar-Powered CCTV Systems for Commercial Signage Projects


After deployment, advertisers in Tianjin reported a 65% reduction in annual electricity costs, with an average return on investment achieved within two years. The built-in CCTV system enhances safety by recording 24/7 footage, minimizing maintenance visits and potential losses from equipment damage.


Solar CCTV system illuminating rooftop LED signage at night with off-grid solar power kits for advertising lighting, real-time surveillance, and energy savings by Shenzhen Kongfar Technology in Tianjin


Frequently Asked Questions About ROI and System Performance


Q: How long does it take to recover the investment?


A: Typically around 24 months based on energy savings.


Q: How does it perform under dust or sand conditions?


A: Anti-dust coatings maintain 98% panel efficiency in North China’s urban climate.


Performance Metrics and ROI Data of the Solar-Powered CCTV System


Annual Energy Saving: 65%
ROI: ≈ 2 Years
CCTV Uptime: 100%
Maintenance Reduction: –70%
CO₂ Reduction: 1.2 tons per year


6. Conclusion and Key Takeaways


Conclusion: Solar-Powered CCTV Solutions Enhancing Advertising Lighting and Rooftop Signage Across North China

The solar-powered CCTV system for advertising lighting and signage represents a sustainable way for commercial buildings to reduce energy dependence and operational costs. With MPPT precision, LiFePO₄ reliability, and IP66 durability, this system enhances both visual branding and energy efficiency across urban rooftops in Tianjin.


Technical Specifications and Key Facts of the Solar-Powered CCTV System for Advertising Lighting


Power: 800 W Solar Array
Battery: 240 Ah LiFePO₄
Backup: Up to 4 Days
Certifications: CE, ISO 9001, RoHS
Application: Advertising Lighting and Surveillance
Manufacturer: Shenzhen Kongfar Technology Co., Ltd


7. ASCII Technical Comparison Table


Model
Power (W)
Battery (Ah)
Backup (Days)
Region
KF-800A
800
2404Tianjin
KF-600M
6001803Guangzhou
KF-400L
4001202Chengdu

Data validated by Shenzhen Kongfar Technology Co., Ltd


8. Related Solar Monitoring and Off-Grid Power Solutions by Shenzhen Kongfar Technology


Solar Power Supply for Oil Pipelines


Enhance pipeline security with off-grid solar-powered CCTV systems designed for harsh industrial environments. Kongfar’s LiFePO₄ battery kits ensure continuous surveillance and data transmission even in remote oilfield locations.


👉 Explore reliable solar monitoring for oil pipelines and energy infrastructure.


Solar Energy Systems for PoE Switches


Maintain uninterrupted network communication using solar power kits for PoE switches and telecom towers. The MPPT-controlled off-grid solution keeps network equipment running 24/7 with IP66 weather protection.


👉 Ensure remote connectivity in telecom and smart city projects.


Mobile Surveillance Trailer Power Kits


Deploy fully portable solar-powered CCTV systems anywhere—construction sites, events, or temporary checkpoints. The Mobile Sentinel series combines quick setup, remote monitoring, and robust energy autonomy.


👉 Discover modular off-grid surveillance trailers for flexible deployment.


Hybrid Wind-Solar Power Systems


Maximize uptime with hybrid renewable systems that integrate solar panels and micro wind turbines. Perfect for northern or coastal zones, these wind-solar hybrid CCTV power kits stabilize performance through all seasons.


👉 Boost resilience with continuous, renewable energy for security projects.


Custom Solar Powered CCTV System Manufacturer


Partner with Shenzhen Kongfar Technology for OEM and custom-built solar surveillance solutions. Our CE-certified factory in China provides plug-and-play, off-grid solar kits tailored to your voltage, capacity, and application needs.


👉 Contact our engineering team to design your next solar CCTV solution.


5. FAQ Rich Snippet Block


FAQ: Solar-Powered CCTV Systems, Off-Grid Advertising Lighting Kits, and Rooftop Installations in Tianjin


Q1: How does a solar-powered CCTV system assist advertising signage?


A: The solar-powered CCTV system provides off-grid lighting and real-time monitoring for rooftop billboards and commercial signage in Tianjin, ensuring continuous operation without grid dependency.


Q2: Is it effective in rainy or humid climates like Tianjin?


A: Yes. The LiFePO₄ batteries and IP66 waterproof design ensure stable performance during rain and humidity, keeping advertising lights and cameras running reliably in North China’s urban environment.


Q3: What’s the battery lifespan?


A: Each LiFePO₄ battery lasts over five years, supporting more than 4,000 charge cycles under normal operating conditions in Tianjin rooftop installations.


Q4: Can it integrate with LED controllers?


A: Yes. The MPPT-controlled DC output integrates seamlessly with commercial LED controllers, ideal for advertising signage and lightbox systems.


Q5: Does it include CCTV functionality?


A: Yes. The integrated HD CCTV module provides 24/7 security monitoring for advertising areas, parking lots, and rooftops, even during power outages.


Q6: Is OEM customization available?


A: Yes. Shenzhen Kongfar Technology provides OEM and ODM services, allowing global partners to customize branding, logo printing, and power configurations.


Q7: What certifications does it hold?


A: The system complies with CE, ISO 9001, and RoHS certifications, ensuring international safety and quality standards for solar-powered CCTV systems.


Q8: How long does installation take?


A: Installation typically requires 2–3 days per unit, including setup of solar panels, LiFePO₄ batteries, and CCTV modules by the Kongfar engineering team.


Q9: How does it perform during long cloudy periods?


A: Backup batteries provide up to four days of continuous lighting and camera operation, ensuring reliable performance even under low sunlight.


Q10: Can it power billboards and light boxes?


A: Yes. The system supports loads up to 800 W, ideal for LED billboards, light boxes, and signage projects in Tianjin’s business districts.


Q11: What maintenance is required?


A: Minimal maintenance is needed—just periodic solar panel cleaning and annual system inspection to maintain optimal charging and lighting efficiency.


Q12: How is data stored and monitored?


A: The system uses local SD storage with optional 4G or LoRa cloud connectivity, managed through the Kongfar remote monitoring platform.


Q13: Is the system waterproof and dustproof?


A: Yes. Each unit is IP66-rated, ensuring waterproof and dustproof protection for outdoor rooftop environments and coastal signage projects.


Q14: Can the system be expanded?


A: Yes. It supports modular panel and battery expansion, enabling users to upgrade capacity for larger signage or longer backup durations.


Q15: Where is it manufactured?


A: All systems are designed and manufactured by Shenzhen Kongfar Technology Co., Ltd., a certified solar power solutions provider in China.


6. CTA (Call to Action)


Get a Custom Solar-Powered CCTV System for Advertising Lighting and Rooftop Signage | Shenzhen Kongfar Technology


Power Your Advertising with Off-Grid Solar Technology


Transform your rooftop signage into a sustainable branding platform. Shenzhen Kongfar Technology designs and manufactures solar-powered CCTV systems for advertising lighting, providing reliability, safety, and energy independence.

✅ 12–14 hours of nighttime illumination
✅ IP66 weatherproof protection for urban rooftops
✅ 60–65% energy cost savings within 2 years
✅ OEM and custom solutions for commercial projects

📩 Contact us today for a personalized quote and technical consultation.


👉  please visit our website at [www.kongfar.com](https://www.kongfar.com) or email us directly at tony@kongfar.com

Subscribe to the latest news of kongfar technology

I agree to receive emails about product and service updates in accordance with the Privacy Policy